Products
We organize our catalog to meet both engineering and procurement needs: by material for engineers specifying exact polymer grades, and by form for buyers sourcing semi-finished stock or finished parts.
Plastic Sheets
Extruded and cast sheets in thicknesses from 0.5 mm to 200 mm, cut to your required dimensions.
Request Quote
Plastic Rods & Tubes
Solid and hollow rods plus seamless tubes for machining, structural support and fluid transfer.
Request Quote
Custom CNC Machined Parts
Precision components manufactured to your CAD drawings, with tight tolerances and full traceability.
Request QuoteProduct Catalog by Material
| Category | Sub-Category | Specific Grades |
|---|---|---|
| Engineering Plastics | Standard & High-Performance | ABS, PC, POM, MC Nylon (PA6/PA66), HDPE, UHMWPE, PPS, PSU, PEI, PEEK... |
| Anti-static ESD Plastics | Static-Dissipative Grades | ESD ABS, ESD PC, ESD PMMA, ESD POM, ESD PA6, ESD FR4/G10... |
| Fluoroplastics | Virgin & Filled Grades | PTFE, PVDF, FEP, PFA, PCTFE |
| Thermoset Laminates | Insulation & Structural | 3240 / FR4 / G10 / G11, GPO-3, Bakelite |
| Custom CNC Machined Parts | Custom Components | Gaskets, rings, wear strips, insulating parts, non-standard plastic components |
Key Material Properties
Typical values for reference. Exact properties vary by grade and manufacturer. Contact us for material-specific datasheets.
| Material | Max Continuous Temp | Density | Typical Machining Tolerance | Key Characteristics |
|---|---|---|---|---|
| PTFE | 260 °C | 2.15 g/cm³ | ±0.10 mm | Excellent chemical resistance, lowest friction, non-stick |
| PEEK | 260 °C | 1.32 g/cm³ | ±0.05 mm | High mechanical strength, sterilizable, aerospace grade |
| PVDF | 150 °C | 1.78 g/cm³ | ±0.10 mm | High purity, corrosion resistance, UV stable |
| POM (Acetal) | 120 °C | 1.41 g/cm³ | ±0.05 mm | Low friction, excellent wear resistance, dimensional stability |
| MC Nylon (PA6) | 120 °C | 1.15 g/cm³ | ±0.10 mm | Good impact strength, noise damping, easy machining |
| ESD POM | 120 °C | 1.45 g/cm³ | ±0.05 mm | Static-dissipative (10&sup6;–10&sup9; Ω), for electronics |
| UHMWPE | 90 °C | 0.94 g/cm³ | ±0.10 mm | Ultra-low friction, highest wear resistance, food-grade |
| FR4 / G10 | 130 °C | 1.85 g/cm³ | ±0.05 mm | Excellent electrical insulation, high mechanical strength |
Classification by Form
- Plastic Sheets: extruded and cast sheets, 0.5 mm – 200 mm thickness.
- Plastic Rods: solid and hollow rods for machining and structural supports.
- Plastic Tubes: seamless and extruded tubes for fluid transfer and insulation.
- CNC Machined Components: custom precision parts per your CAD drawings.
